Exterior and Topside Areas

April 5, 2009

Main Library

A Primary Mission of the Council is to promote effective means of surface preparation in the maintenance industry using water and water/abrasive blasting techniques. More discussions on Flotsam and Jetsam.

1.1 Cleaning, Surface Preparation and Paintings Requirements for Exterior Topside Areas.

MSDS and manufacturer’s ASTM F 718 sheets, Shipbuilders and Marine Paints and Coating Product / Procedure Data Sheet for (Applicable QPL) Coating System Being Applied.

Sigma Edgeguard, Euronavy ES 301 System, Sherwin Williams Nova-Plate UHS, Niles 7229C LSA, Interlac 1 LSA/Anti-Stain.

If flash rusting occurs, the extent of the flash rust will determine the correct method of managing the flash rust.

Methods to reduce the flash rust to acceptable levels include UHP Water Jetting to WJ-2L, SSPC-SP-12, solvent wiping or HAND wire brushing the surface to the satisfaction of the Responsible Implementing Authority.

NOTE: IF INTERMEDIATE COAT IS SOLVENT FREE COATING, INTERMEDIATE COAT SHALL BE ALLOWED TO DRY FOR 24 HOURS PRIOR TO APPLICATION OF TOPCOAT.

[Download not found]

No comments yet.

Leave a Reply